24/7 Locksmith Services in St. Louis

Automotive Locksmith

Car Key Fob Replacement in University city, MO

When a fob is lost, cracked or soaked, you need a new part, not only a programming session. We supply the correct remote head key or fob for your vehicle, cut its blade, and set it up at your location around St. Louis.

Flip-style car key fob with remote buttons on a white surface

Replacing a lost or broken fob

A replacement starts with identifying the exact part. Two fobs that look identical can transmit on different frequencies or carry different chips, so we go by your year, make, model and trim, and by the FCC ID and part number on your old remote if you still have it. The wrong part will not pair, however carefully it is programmed.

Many remotes also carry a key blade. On a remote head key the blade is fixed to the housing, on a flip key it folds into the case, and both have to be cut to match your door and ignition. We cut standard edge cut blades and the high security laser cut style with a groove milled down the face.

Not every damaged fob needs full replacement. If the circuit board still works and only the case or button pad has worn through, moving the electronics into a new shell is often enough. We look at what you have and tell you which route makes sense. We cover most makes and models, so call with your year, make and model and we will confirm yours.

What fob replacement includes

Depending on your vehicle and what happened to the old remote, the job can cover the following.

  • Identifying the correct fob for your vehicle
  • Supplying a new remote head key or fob
  • Cutting edge cut or laser cut blades
  • Replacement shells and button pads
  • Fresh coin cell battery fitted
  • Pairing the new remote to the car
  • Programming the transponder chip if fitted
  • Removing the lost fob from memory

Benefits of professional car key fob replacement

Questions about car key fob replacement? Call 314-314-9909 and talk it through with us.

The right part, checked twice

We match frequency, chip type and button layout to your vehicle before the fob is ordered or pulled from stock, so it will pair when we arrive.

Blade cut on site

We carry key cutting machines for edge cut and laser cut blades, so the mechanical part of the key is finished at your car.

Shell swaps when they suit

A cracked case with healthy electronics can often be rebuilt in a new housing, which keeps your existing programming intact.

Working key in hand

You end up with a fob that locks, unlocks and starts the car, plus a blade that turns smoothly in the door.

Common reasons for a new fob

The fob is lost

With no remote to copy, we work from your vehicle details, supply a new one and program it. Proof of ownership is required.

It went through the wash

Water corrodes the circuit board quickly. Sometimes drying and cleaning saves it. When it does not, a new fob is the fix.

The case is cracked or the loop snapped

A broken key ring loop or split housing usually means a shell replacement, with your original board moved across to the new case.

Buttons no longer respond

If a new battery does not help, the contacts under the pad are probably worn. We test the board before recommending a replacement.

Our approach to replacing fobs

Repair is offered when it will last

We tell you plainly if a new shell or battery will solve the problem, and when the electronics are too far gone to save.

Options explained before we order

Where both original equipment and aftermarket fobs exist for your car, we describe the difference and let you choose before work starts.

The whole job done at your address

A car with no working key cannot easily be driven anywhere, so we bring the part, the cutter and the programmer to you in the St. Louis metro.

Our car key fob replacement process

1

Tell us what happened

Call with your year, make and model, and say whether the fob is lost, damaged or only partly working. We give you a quote.

2

We source the correct part

We confirm the fob type, chip and blade profile for your trim level and bring the matching part to your location.

3

Cut and program

We check your ID and registration, cut the blade by code or from your existing key, then pair the remote and chip to the car.

4

Final checks

Every button, the door lock, the ignition and the trunk are tested with you present before the job is closed out.

Car Key Fob Replacement questions

Have a question that is not covered here? Call us at 314-314-9909 and we will answer it directly.

Yes, on most makes and models. Without a working key the car has to be put into programming mode through its diagnostic port, and the blade has to be cut from a key code or by decoding a lock. It takes longer than adding a spare, and we need proof that the vehicle is yours.

A remote head key is one piece, a metal blade with lock and unlock buttons built into the head. A separate fob is a button remote that hangs beside a plain key. A flip key folds the blade into the remote body. Which one your car uses depends on the model, year and trim.

If the circuit board still transmits, a new shell, button pad or battery is usually the sensible choice. If the board has water damage, a cracked trace or a dead chip, replacement is more reliable. We test the remote on site and give you both options where both exist.

A well made aftermarket fob does the same job, although the plastics and button feel can differ and range may vary a little. Original equipment parts match what came with the car. Not every vehicle has a dependable aftermarket option, so we tell you what is available for yours before you decide.

Your year, make and model, the VIN if you can read it through the windshield, and photo ID with registration or title showing the car is yours. If you still have the damaged fob, keep it. The part number and FCC ID printed on it help us match the replacement.

Free quote

Tell us what you need and we will get back to you

Send a few details about the lock, key or vehicle and where the work is needed. For anything urgent, calling is the fastest way to reach us.

  • Residential, commercial and automotive work
  • We explain your options before any work starts
  • Mobile service across the St. Louis area

Request a free quote

Need a locksmith in St. Louis? Call us now.

Speak with St. Louis Locksmiths about your home, business or vehicle. We will tell you what the job involves and send a technician to you.