24/7 Locksmith Services in St. Louis

Residential Locksmith

Lock Installation in University city, MO

Knobs, levers, handlesets and the latches behind them all need to be fitted to the door they are going on. We install new locks on existing doors and on freshly hung ones at homes around St. Louis, with the bore, latch and strike set up correctly.

Edge of an open door showing a mortise lock case and latch

Fitting the right lock to the right door

Every lock has a function, and choosing it comes first. A keyed entry set locks from outside with a key. A privacy set, used on bathrooms and bedrooms, locks with a button and opens from outside with a pin. A passage set only latches. A dummy set is a fixed pull with no latch at all. We walk through each door with you and match the function to how the room is used.

Then comes the door itself. Levers are handed, so a left hand door and a right hand door may need different parts or a lever that can be reversed. The latch has to sit flush in the door edge, the backset has to match the bore, and the strike has to meet the latch so the door closes with a light push and does not rattle.

New slab doors come with no preparation, and many older St. Louis doors were cut for hardware that is no longer made. We bore fresh doors with a jig, and on older ones we work out whether a modern cylindrical lock will cover the existing holes or whether a cover plate or a mortise style replacement is the cleaner answer.

What lock installation includes

The exact steps depend on the door, but an installation usually covers these.

  • Choosing lock function for each door
  • Boring unprepared slab doors
  • Fitting the latch and faceplate
  • Setting lever handing correctly
  • Front door handleset mounting
  • Strike plate alignment and mortising
  • Keying new exterior locks alike
  • Interior privacy and passage sets

Benefits of professional lock installation

Questions about lock installation? Call 314-314-9909 and talk it through with us.

Hardware that suits each door

Entry, privacy and passage functions are chosen room by room, so you are not left with a keyed lock on a closet or no lock on a bathroom.

Doors that latch on their own

We set the strike so the latch drops in as the door closes. No lifting the handle, no shoulder against the door, no rattling in a draft.

Levers that sit level

A lever that droops is usually installed with the wrong handing or loose through bolts. We set the spring cassette and fasteners correctly from the start.

A matching set across the house

When several locks go in together, we can key the exterior ones alike and keep the finish and style consistent from front door to back.

Jobs that call for new lock hardware

A new or replacement door

A door from the lumber yard or a salvage shop needs to be bored and fitted before it can latch. We prepare it for the hardware you picked.

A finished basement or addition

New rooms mean new doors. We install the interior sets and any exterior entry lock, keyed to match the rest of the house if you want.

A front door handleset

Handlesets have a thumb latch, a long grip with a lower fixing point, and a separate deadbolt above. All three positions must be laid out before drilling.

Changing knobs to levers

Levers are easier for children, older relatives and anyone with a full armload. We swap round knobs for levers and correct the latch if the door needs it.

How we approach a lock installation

Options explained before anything is drilled

We describe the grades, functions and finishes that suit your doors, and we will tell you the cost before work starts.

Careful work on finished doors

Painted, stained and antique doors get taped, clamped and drilled from both faces so the surface around the new hardware stays clean.

A mobile locksmith for the whole property

We serve the St. Louis metro and handle house, business and vehicle locks, so the garage, the rental unit and the shop can be done by the same people.

Our lock installation process

1

Walk the doors

We go door to door with you, note the function each one needs, measure thickness and backset and check which way every door swings.

2

Prepare the door

Unbored doors are drilled with a jig. Existing holes are checked against the new lock and corrected with a plate or filler where needed.

3

Mount latch, lock and strike

The latch goes in first, then the two halves of the lock are bolted through it, and the strike is set to meet the latch.

4

Check the swing and the keys

Each door is closed gently, locked and opened several times, and every key is tried in every lock it is meant to operate.

Lock Installation questions

Have a question that is not covered here? Call us at 314-314-9909 and we will answer it directly.

Yes, as long as the lock suits the door. Bring out what you have and we will check the backset, door thickness range and handing before fitting it. If something will not work on a particular door, we will explain why and what would fit in its place.

They are ANSI/BHMA durability and strength grades. Grade 1 is the heaviest duty and is common on commercial doors, Grade 2 is a solid residential choice for exterior doors, and Grade 3 is light duty hardware usually sold for interior use. We can show you the practical difference on your own doors.

That is a mortise lock, common in older St. Louis homes. A modern cylindrical lock needs round bores the door does not have, and the old pocket leaves a gap. It can be done with a conversion plate, though keeping or replacing the mortise lock often looks better. We will show you both routes.

Most households prefer it. Locks from the same keyway family can be pinned to one key, so the front, back and garage entry all open with it. Some people keep a separate key for a rental unit, a workshop or a door used by contractors, and we can set that up too.

Often they do. A new latch may sit at a slightly different height or project a different distance than the old one. If the strike is not moved to suit, the door bounces back open or needs a hard push, so we check and correct each one.

Free quote

Tell us what you need and we will get back to you

Send a few details about the lock, key or vehicle and where the work is needed. For anything urgent, calling is the fastest way to reach us.

  • Residential, commercial and automotive work
  • We explain your options before any work starts
  • Mobile service across the St. Louis area

Request a free quote

Need a locksmith in St. Louis? Call us now.

Speak with St. Louis Locksmiths about your home, business or vehicle. We will tell you what the job involves and send a technician to you.