24/7 Locksmith Services in St. Louis

Commercial Locksmith

Access Control Systems in University city, MO

Access control replaces or backs up a metal key with a code, card, fob or phone credential. We install and service keypads, readers and electrified locking hardware on business doors around St. Louis, and we explain how each option behaves before you commit.

Finger pressing a wall-mounted access control keypad and reader

What goes into an access controlled door

Every controlled opening has the same basic parts. A reader or keypad identifies the person. A controller or the lock itself decides whether to let them in. Locking hardware releases the door, and a power supply runs it all. The choice of locking hardware matters most, because it sets how the door behaves when power is lost and how people get out.

An electric strike replaces the strike plate in the frame and releases the latch while the existing lock stays in place, so the lever or exit device still lets people out mechanically. A maglock holds the door with an electromagnet and has no latch at all, so it needs a request-to-exit sensor or button to release it from inside. Electrified levers and exit devices put the electrics in the lock body.

Electrically locked doors are closely tied to fire and egress rules, and maglocks in particular. What is allowed depends on your building, its occupancy and the local authority. We will work to what your inspector, fire marshal or building owner requires, and where a door connects to a fire alarm we coordinate with whoever maintains that system.

Access control work we do

We cover the door hardware side of access control, from one opening to several.

  • Standalone keypad and pushbutton locks
  • Card, fob and mobile credential readers
  • Electric strike installation in frames
  • Maglocks with request-to-exit devices
  • Electrified levers and exit device trim
  • Power supplies and door wiring
  • Programming users, codes and schedules
  • Troubleshooting doors that fail to release

Benefits of professional access control systems

Questions about access control systems? Call 314-314-9909 and talk it through with us.

No rekey when someone leaves

A code is deleted or a card is cancelled in a minute. The other credentials keep working and no cylinder has to be repinned.

Know who came in

Many systems keep an audit trail of which credential opened which door and when, useful after an incident or a stock discrepancy.

Access by schedule

A cleaner’s fob can work only on certain days, and a front door can stay on free entry during opening times and lock itself afterward.

Scaled to the door count

A single back door may need only a standalone keypad lock. Several doors may justify networked readers managed from one screen.

Common reasons to add access control

High staff turnover

Restaurants, retail and care settings change staff often. Removing a code is far quicker than collecting keys or rekeying the back door each time.

Shared entrances

Tenants in a multi-suite building need the lobby door but not each other’s offices. Readers at the common entry handle that cleanly.

Rooms with sensitive contents

Server closets, medication rooms and stock cages benefit from a record of entries and a short list of approved credentials.

An existing system acting up

A door that buzzes but stays latched, or a reader that has gone dead, usually points to the strike, the wiring or the power supply.

How we approach access control

Hardware chosen for your door

We check the frame, the existing lock, door swing and how people exit before recommending a strike, a maglock or an electrified lock.

Fail safe and fail secure explained

We walk you through what each door will do in a power cut, so the choice is yours and made with clear information.

Mechanical backup kept

Where it suits the opening we leave a keyed cylinder as an override, so a dead power supply does not leave you stuck outside.

Our access control systems process

1

Site visit

We look at each door, frame and existing lock, find a route for cable and power, and ask who needs access and when.

2

Recommendation and quote

You get a plain description of the hardware we suggest for each opening and the cost before any work starts.

3

Installation

We fit the locking hardware, reader, exit device or sensor, run the wiring and connect the power supply, keeping the door usable where possible.

4

Programming and training

We enroll users, set schedules, test entry and exit on every door, and show your staff how to add and remove people.

Access Control Systems questions

Have a question that is not covered here? Call us at 314-314-9909 and we will answer it directly.

A fail safe lock releases when power is lost, and a fail secure lock stays locked. Maglocks are fail safe by nature. Electric strikes can be either. Fail secure hardware still has to let people out from inside by mechanical means. Which one a given door needs depends on its use and on local requirements.

An electric strike is usually the simpler choice on a door with a latching lock, because exit stays mechanical. Maglocks suit frameless glass doors and openings with no practical place for a strike, but they need request-to-exit hardware and often extra release provisions. Your local authority may have specific rules for them.

It is the part that tells the system someone is leaving. It can be a motion sensor above the door, a push button on the wall, or a switch built into an exit bar. On a maglocked door it drops the magnet. On a strike door it stops the door from reporting a forced opening.

With the right readers, yes. Many current systems accept mobile credentials over Bluetooth or NFC alongside cards and fobs. It reduces lost card problems, though you should plan for flat batteries and for visitors. We can show you systems that take more than one credential type, so you have a fallback.

It depends on how it is set up. Many controllers store their user list locally and keep working without a network. A battery backup on the power supply keeps doors running through short outages. Beyond that, the fail safe or fail secure setting and any key override decide what happens.

Free quote

Tell us what you need and we will get back to you

Send a few details about the lock, key or vehicle and where the work is needed. For anything urgent, calling is the fastest way to reach us.

  • Residential, commercial and automotive work
  • We explain your options before any work starts
  • Mobile service across the St. Louis area

Request a free quote

Need a locksmith in St. Louis? Call us now.

Speak with St. Louis Locksmiths about your home, business or vehicle. We will tell you what the job involves and send a technician to you.