Exit devices come in a few main types. A rim device mounts on the door face and its latch projects into a surface strike on the frame, which makes it the most common and the simplest to service. A mortise exit device operates a mortise lock body set inside the door edge. Vertical rod devices latch at the top of the frame and often at the floor too.
Vertical rods are used mostly on pairs of doors with no center mullion. Surface vertical rods run on the face of the door, and concealed vertical rods run inside it. They need the most adjustment, because a rod that is slightly too long or short will stop a door latching or make the bar hard to push. Sagging doors and worn hinges make this worse.
Dogging holds the pushbar down and the latch retracted, so the door works as a simple push and pull during business. It is done with a hex key or a cylinder. Fire-rated openings use fire exit hardware, which has no mechanical dogging because the door must latch. Which doors need which hardware depends on your building and the local authority.