24/7 Locksmith Services in St. Louis

Commercial Locksmith

Truck & Fleet Locksmith in University city, MO

A truck with no key earns nothing. We make keys, open locked cabs and repair locks on commercial trucks, cargo vans and fleet vehicles around St. Louis, working at your yard, a job site or wherever the vehicle is parked.

White work van parked on a city street

Keys and locks for working vehicles

Commercial vehicles are keyed in different ways. Many heavy trucks still use a plain mechanical key with no chip, and fleets are sometimes ordered keyed alike so any driver can take any unit. Late model work vans and pickups, and a growing share of medium and heavy trucks, use a transponder chip that the immobilizer must recognize before the engine will start.

When a key is lost we can originate a new one by decoding the door or ignition lock, or by cutting to the key code where it is available. Chip keys and remote head keys are then programmed to the vehicle, usually through the OBD port or the truck’s diagnostic connector. What is possible varies by make, model and year, so we confirm that when you call.

A lot of fleet work is not about the ignition at all. Cargo doors, roll-up door latches, side toolboxes, ladder racks and trailer doors all carry locks that wear out or get forced. St. Louis sits on several interstates, including I-70, I-44, I-55 and I-64, so trucks passing through sometimes just need a key made or a cab opened to keep moving.

Fleet and truck services

We work on cabs, cargo areas and the locks that travel with the vehicle.

  • Cab lockouts on trucks and vans
  • Replacement keys cut by code or decoding
  • Transponder and remote head key programming
  • Ignition cylinder repair and replacement
  • Door and cargo lock rekeying
  • Hasp and puck locks for cargo doors
  • Keyed alike padlock sets for trailers
  • Broken key extraction

Benefits of professional commercial truck & fleet locksmith

Questions about commercial truck & fleet locksmith? Call 314-314-9909 and talk it through with us.

We come to the vehicle

A box truck or tractor does not need a tow to a dealer for a key. We work in your yard, at a dock or at the roadside.

Spares before you need them

Cutting duplicate keys for each unit while one still exists is far simpler than originating a key after the last one disappears.

One key plan for the fleet

Padlocks, cargo locks and toolboxes can be keyed alike or to a master, so drivers and dispatch carry fewer keys.

Lost keys taken out of use

On many vehicles, lost chip keys can be erased from the immobilizer memory, and mechanical locks can be rekeyed to a new cut.

Typical fleet calls

Keys locked in the cab

The engine is off, the keys are on the seat and a delivery is waiting. We open the door with methods chosen to protect seals and linkages.

A driver leaves with the keys

A unit is stuck in the lot with no key. We originate a new one and, where the vehicle supports it, remove the missing key from memory.

A worn key or ignition

The key has to be jiggled or will not turn. Cutting a fresh key to code or servicing the ignition cylinder usually cures it.

Cargo theft or tampering

A van’s rear door lock has been punched or pried. We repair the lock and can add a hasp with a shrouded puck lock.

How we work with fleets

We ask the right questions first

Year, make, model, VIN and what keys remain tell us what is involved, so you hear what we can do before we set out.

Proof of authority

We ask for evidence that you own or operate the vehicle before making keys or opening it, which protects your equipment too.

Vehicles and buildings together

The same call can cover your yard gate padlocks, office doors and shop locks along with the trucks.

Our commercial truck & fleet locksmith process

1

Call with the vehicle details

Give us the year, make, model, VIN if you have it, where the unit is, and whether any working key exists.

2

Confirm what is possible

We tell you whether we can cut and program a key for that vehicle and what it will cost before we start.

3

Work at the vehicle

We open the cab, decode or cut the key, program it where needed, or repair the lock on site.

4

Test and record

Each key is tried in the doors and ignition and the engine is started. Key codes can be noted for your fleet file.

Commercial Truck & Fleet Locksmith questions

Have a question that is not covered here? Call us at 314-314-9909 and we will answer it directly.

In many cases, yes. Heavy trucks from makers such as Freightliner, Kenworth, Peterbilt, International and Volvo often use mechanical keys that can be cut by code or by decoding a lock. Some newer models add an immobilizer that needs programming. Tell us the year and model and we will say what is possible.

Yes, for many of them. Vans such as the Ford Transit, Ram ProMaster, Mercedes-Benz Sprinter and Chevrolet Express use transponder keys or remote head keys that have to be introduced to the immobilizer. Coverage differs by year and system, so we check your exact vehicle before quoting or travelling.

Sometimes. Vehicles ordered keyed alike from the factory already do. Retrofitting that to mixed makes is rarely practical for ignitions, especially with chip keys. What works well is keying the padlocks, cargo locks and toolboxes alike, which removes most of the key ring without touching the ignition.

We need to know you are entitled to the vehicle. Registration, a company ID, a fleet card or confirmation from a manager or dispatcher are typical. The VIN and any remaining key or key code speed things up. We ask this for every vehicle, and it protects owners from keys being made for the wrong person.

Yes. Common upgrades are a hasp with a hidden shackle puck lock on rear and side doors, bracket kits that mount without drilling on some vans, and hardened padlocks on trailer doors. We look at how the door is built and what it carries, then suggest what suits it.

Free quote

Tell us what you need and we will get back to you

Send a few details about the lock, key or vehicle and where the work is needed. For anything urgent, calling is the fastest way to reach us.

  • Residential, commercial and automotive work
  • We explain your options before any work starts
  • Mobile service across the St. Louis area

Request a free quote

Need a locksmith in St. Louis? Call us now.

Speak with St. Louis Locksmiths about your home, business or vehicle. We will tell you what the job involves and send a technician to you.