24/7 Locksmith Services in St. Louis

Residential Locksmith

Lock Repair in University city, MO

A lock that jams, wobbles or will not latch can usually be put right without replacing it. We repair knob locks, levers, mortise locks and latches at homes around St. Louis, and we tell you honestly when a repair is not worth doing.

Key cylinder and escutcheon on the edge of a door

Fixing the lock you already have

Most residential lock faults come down to a handful of parts. The latch stops springing back because its return spring is tired or the bolt is gummed up. A knob or lever turns without retracting the latch because the spindle or retractor is worn. A handle hangs loose because a set screw or through bolt has backed out. We open the lock up, find the failed part and repair or replace it.

Key trouble is its own category. A key that goes in but will not turn may be meeting worn pins, a bent key or debris in the keyway. A key that snapped off leaves a fragment that has to be drawn out with an extractor without pushing it deeper. Afterward we check why it broke, because a stiff cylinder will break the next key too.

Older St. Louis houses add one more kind of work. Original mortise locks, the tall cases set into the door edge behind a brass or glass knob, have springs, levers and hubs that can be cleaned, re-sprung and put back into service. Many owners would rather keep that hardware than cut the door for something modern, and in most cases that is possible.

Repairs we carry out on house locks

Lock repair covers a wide range of small mechanical jobs, including these.

  • Latch and spring replacement
  • Tightening loose knobs and levers
  • Broken key extraction
  • Cylinder cleaning and re-pinning
  • Mortise lock servicing
  • Spindle and set screw repair
  • Realigning latch and strike
  • Patio and storm door locks

Benefits of professional lock repair

Questions about lock repair? Call 314-314-9909 and talk it through with us.

Only the failed part is replaced

Replacing a latch, a spring or a cylinder is a smaller job than a full new lock set, and it leaves your matching hardware in place.

Original hardware preserved

Period knobs, backplates and mortise cases can stay on the door. We repair the mechanism behind them and leave the look of the door alone.

Small faults caught early

A loose handle or a latch that hesitates gets worse. Dealing with it now avoids the day it fails with the door shut.

A clear answer on what is wrong

You see the worn part and hear what caused it, so you know whether other locks of the same age are likely to follow.

Problems that bring us out

The door will not stay shut

The latch is not reaching the strike or is not springing out fully. We check the latch, the strike position and the gap along the door edge.

The handle turns but nothing happens

Something between the handle and the latch has sheared or slipped. On a bedroom or bathroom door this can trap someone inside the room.

A key broke off in the lock

We extract the piece, check the cylinder for the stiffness that caused the break, and cut a new key from the two halves if needed.

The lock was damaged in a break-in attempt

Pried latches, bent bolts and chewed cylinders are assessed part by part. We secure the door first, then explain what can be saved.

How we approach a lock repair

We take the lock apart to be sure

Guessing from the outside leads to wrong parts. We open the lock, look at the mechanism and show you what has failed.

Repair first, replacement when it makes sense

We explain both options and what each involves before any work starts, and you choose. Some locks are worth saving and some are not.

Parts and tools travel with us

As a mobile locksmith serving St. Louis and the surrounding communities, we carry common latches, cylinders, springs and screws to finish most repairs on site.

Our lock repair process

1

Describe what the lock is doing

Tell us whether it is the key, the handle or the latch that misbehaves, and whether it happens every time or only now and then.

2

Strip and inspect

The lock comes off the door or is opened in place. We look for worn, bent, broken or missing parts and check the door fit as well.

3

Fix or swap the faulty part

Springs, latches, spindles and pins are replaced as needed, moving parts are cleaned and lubricated, and fasteners are tightened properly.

4

Reassemble and cycle the lock

We operate the lock many times with the door open and shut, using each key, to be sure the fault does not return.

Lock Repair questions

Have a question that is not covered here? Call us at 314-314-9909 and we will answer it directly.

If the body of the lock is intact and the fault is a single part, such as a latch, spring, cylinder or screw, repair is normally practical. Cracked housings, stripped internal threads and heavy corrosion are harder to come back from. We can tell which case yours is after opening it.

If a piece is sticking out, you may be able to grip it with pliers and pull straight. Do not push anything into the keyway and do not use glue. A fragment driven deeper, or a glued plug, turns a simple extraction into a cylinder replacement.

Usually, yes. Most failures in old mortise locks are broken flat springs, worn hubs or decades of paint and dried grease. The case can be opened, cleaned and re-sprung. If an internal part is beyond saving, we will discuss a replacement case that fits the same pocket.

Knobs on threaded spindles rely on a set screw seated against a flat or in a threaded hole, and a worn spindle will not hold it. On modern locks the through bolts may be stripping out. Tightening treats the symptom, so we look for the worn part behind it.

Yes. Bedroom, bathroom, closet and basement door locks all get repaired, along with entry doors. Interior faults matter more than people expect, because a privacy lock that fails in the locked position can shut a child or an older relative inside a room.

Free quote

Tell us what you need and we will get back to you

Send a few details about the lock, key or vehicle and where the work is needed. For anything urgent, calling is the fastest way to reach us.

  • Residential, commercial and automotive work
  • We explain your options before any work starts
  • Mobile service across the St. Louis area

Request a free quote

Need a locksmith in St. Louis? Call us now.

Speak with St. Louis Locksmiths about your home, business or vehicle. We will tell you what the job involves and send a technician to you.